Skip to Content
Eletta Plus
How can I improve the quality of my frothed milk?
Posible solución encontrada
Clean the cappuccino maker
Possible cause:
Cappuccino maker dirty.
1
Deliver a little water by pressing the OK button
Danger of burns!
When cleaning the cappuccino maker, a little hot water is delivered. Avoid contact with splashes of water.
2
Press the same button again to stop the flow of hot water
3
Wait a few minutes for the cappuccino maker to cool down
4
Turn counter clockwise the cappuccino maker downwards to remove it
5
Move the cappuccino/hot milk ring upwards
6
Slide the nozzle downwards
7
Make sure the two holes shown by the arrows are not blocked
If necessary, clean with a pin.
8
Replace the nozzle and move the ring downwards
9
Wash all parts of the cappuccino maker thoroughly with a sponge and warm water
10
Put the cappuccino maker back on the nozzle, turning it clockwise and pushing it upwards until it is attached
¿Necesita más ayuda?
En esta página