Assicurarsi che l'infusore sia inserito correttamente
Possible cause: The infuser has not been properly replaced after cleaning.
Follow the step-by-step guide:
Come fare per la guida
1. Premere il pulsante ON/OFF
2. Press the main switch
3. Rimuovere il serbatoio dell'acqua
4. Open the infuser door positioned on the right side
of the machine
5. Press the 2 red release buttons inwards and at the same
time pull the infuser outwards
6. Riposizionare l'infusore facendolo scivolare sul
supporto interno, quindi spingere il simbolo PUSH fino a quando non scatta in posizione.
fino a quando non scatta in posizione.
Please note: If the infuser is difficult to insert, before insertion, squeeze the two levers shown in the figure to make it smaller
7. Una volta inserito, assicurarsi che i due pulsanti rossi siano
di nuovo fuori