Skip to Content
Magnifica S Smart
The milk is not frothed
Try this solution
Clean the cappuccino maker
Possible cause:
The cappuccino maker is dirty.
Follow the this step-by-step guide:
1
Danger of burns!
When cleaning the cappuccino maker, a little hot water is delivered. Take care to avoid contact with splashes of hot water
2
Place a container under the cappuccino maker and deliver a little water for a few seconds by rotating the steam dial to the "I" position
3
Turn the steam dial to "0" to stop the flow of water
4
Wait a few minutes for the cappuccino maker to cool down
5
Turn the cappuccino maker downwards to remove it
6
Move the ring upwards until the hole is shown
7
Remove the steam connection nozzle by pulling it downwards
8
Make sure the two holes shown by the arrow are not blocked
If necessary, clean using a toothpick.
9
Wash all parts of the cappuccino maker thoroughly with a sponge and warm water
10
Reinsert the nozzle, then replace the cappuccino maker on the nozzle, turning it and pushing it upwards until it is attached
On this page