Combi coffee maker BCO431.S
The coffee has an acid taste
Try this solution
After descaling, make sure to thoroughly rinse the espresso unit
Possible cause:
Inadequate rinsing after descaling.
Rinse as specified in this step-by-step guide:
1
Please note:
Failure to clean as described in this guide invalidates the guarantee.
2
Remove the water softener filter (if present)
3
Fill the tank with descaler solution
Obtain descaler solution by dilating the descaler with water, following the instructions on the pack.
4
Press the ON/OFF button to switch on the coffee maker.
The ON light comes on.
5
Make sure that the filter holder is not in place and position a container under the cappuccino maker
6
Press the express coffee/hot water button and deliver about 1/4 of the solution in the tank
At intervals, turn the steam dial to deliver water from the cappuccino maker. Then, interrupt the water delivery by pressing the express coffee/hot water button button and leave the solution to work for about 5 minutes.
Repeat this another 3 times until the tank is empty.
7
Rinse the tank well and fill it with clean water (without descaler)
Put back in the coffee machine.
8
Press the express coffee/hot water button
Deliver water until the tank is empty.
9
Rinse the tank well and fill it with clean water (without descaler) again
Put back into the coffee machine.
10
Press the express coffee/hot water button
Deliver water until the tank is empty.
On this page