Skip to Content
Dinamica ECAM35020
The milk is not frothed
Try this solution
Clean the frother
Possible cause:
The frother and steam/hot water connection nozzle are dirty
Follow the guide below for detailed instructions:
1
Danger of burns!
When cleaning the cappuccino maker, a little hot water is delivered. Avoid contact with splashes of water.
2
Deliver a little water by turning the hot water/steam dial to the I position
Then stop delivery by turning the dial back to the O position.
3
Wait a few minutes for the cappuccino maker to cool down
4
Turn the cappuccino maker downwards to remove it
5
Remove the nozzle downwards
6
Make sure the two holes shown by the arrow are not blocked. If necessary, clean with a pin
7
Reinsert the nozzle and replace the cappuccino maker on the nozzle, pushing it upwards and turning it until it is attached
On this page