The grinding is too fine and the coffee is
delivered too slowly or not at all.
The appliance emits a beep if the milk carafe is in place (if the beep function is enabled).
Press (C2) at the bottom of the image corresponding
to the coffee you want to make (e.g. espresso, fig. 15). The parameters that can be customised according to taste appear on the display:
Hot coffee beverage: After setting the parameters, press “Brew”. The appliance starts making the beverage and a description of each individual phase (grinding, brewing coffee) appears on the display.
Cold coffee beverage: Set the parameters, then press
“Start” and proceed as follows:
Select whether to make an “Iced” or “Extra Iced” beverage, then press “Next”;
Depending on the previous selection, before delivery,
the appliance suggests the number of ice cubes. Add the number of ice cubes indicated to the glass (fig. 14), then press “Brew”.
The appliance starts making the beverage and a description of each individual phase (grinding, brewing
coffee) appears on the display.
At the end of delivery, press “Save” to save the new settings, or “Cancel” to retain the previous parameters.
💡 Please note:
If you save the new settings, they are memorised ONLY in the selected profile.
Press “X” to go back to the homepage (C).
The appliance is ready to be used again.