Skip to Content
Magnifica ESAM4200
Steam/hot water is not delivered
Try this solution
Clean the cappuccino maker
Possible cause:
Cappuccino maker dirty.
Follow the guide below for detailed instructions:
1
Deliver a little water for a few seconds by rotating the steam knob to the "steam/water" position
2
Then turn the steam knob back to 'off' to stop the flow of hot water
3
Wait for a few minutes for the cappuccino maker to cool down
4
Grip the handle of the cappuccino maker tube firmly in one hand and with the other rotate the cappuccino maker anticlockwise
5
Remove by pulling downwards
6
Make sure the holes shown by the arrows are not blocked
If necessary, clean with a pin.
7
Wash all parts of the cappuccino maker thoroughly with a sponge and warm water
8
Reinsert the nozzle and replace the cappuccino maker on the nozzle, turning it and pushing it upwards until it is attached
On this page