Skip to Content
Magnifica S Cappuccino
Message: INSERT INFUSER ASSEMBLY
Try this solution
Make sure the infuser is properly inserted
Possible cause:
The infuser has not been properly replaced
after cleaning.
Follow this step-by-step guide:
1
IMPORTANT
The infuser may not be extracted when the machine is on.
2
Press the POWER button to turn the coffee machine off
3
Remove the water tank
4
Open the infuser door positioned on the right sideof the coffee machine
5
Press the 2 coloured release buttons inwards and at the same time pull the infuser outwards
6
Replace the infuser by sliding it onto the internal support, then push the PUSH symbol fully in until it clicks into place.
Please note:
If the infuser is difficult to insert, before insertion, squeeze the
two levers shown in the figure to make it smaller
7
Once inserted, make sure the two coloured buttons have poppedout again
8
Close the infuser door
9
Put back the water tank
On this page