Skip to Content
Manual Espresso maker EC850
The coffee has an acid taste
Try this solution
Rinse the water circuit after descaling
Rinsing the machine eliminates the descaling solution and lime scale residues from the inside water circuit.
1
Wait for the Hot milk/Cappuccino button to turn on
Once the tank is empty from the descaling solution, the light turns on to indicate rinsing is necessary.
2
Empty the containers under the boiler outlet and the hot water spout
Remove the containers under the boiler outlet and the hot water spout and empty them.
3
Rinse the water tank
Remove the empty water tank from the machine and rinse it with fresh clean water.
4
Fill the tank
Fill the tank once more with fresh clean water up to the MAX level and insert it back into the machine.
5
Place one container under the boiler outlet and one under the hot water spout
Make sure the drip tray is empty and correctly inserted.
6
Start the rinsing cycle
Press the button: rinsing starts and all lights flash in sequence.
Rinsing stops when the tank is empty.
7
Make your machine ready for the next use
1.
Remove the containers under the boiler outlet and the hot water spout.
2.
Fill the tank once more with fresh clean water.
3.
Wait for the light to turn on and press the relative button. The machine starts and stops automatically.
The machine now is ready to use.
On this page