ProductDinamica ECAM35X25The milk is not frothed
Dinamica ECAM35X25

The milk is not frothed

Try this solution

Clean the frother

Possible cause:
The frother and steam/hot water connection nozzle are dirty

Follow the guide below for detailed instructions:

How-to guide

1. Danger of burns!

When cleaning the cappuccino maker, a little hot water is delivered. Avoid contact with splashes of water.

2. Deliver a little water by turning the hot water/steam dial to the I position

Then stop delivery by turning the dial back to the O position.


3. Wait a few minutes for the cappuccino maker to cool down

4. Turn the cappuccino maker downwards to remove it


5. Remove the nozzle downwards


6. Make sure the two holes shown by the arrow are not blocked. If necessary, clean with a pin


7. Reinsert the nozzle and replace the cappuccino maker on the nozzle, pushing it upwards and turning it until it is attached