ProductMagnifica S CappuccinoMessage: INSERT INFUSER ASSEMBLY
Magnifica S Cappuccino


Try this solution

Make sure the infuser is properly inserted

Possible cause:
The infuser has not been properly replaced
after cleaning.

Follow this step-by-step guide:

How-to guide


The infuser may not be extracted when the machine is on.

2. Press the POWER button to turn the coffee machine off

3. Remove the water tank

4. Open the infuser door positioned on the right sideof the coffee machine

5. Press the 2 coloured release buttons inwards and at the same time pull the infuser outwards

6. Replace the infuser by sliding it onto the internal support, then push the PUSH symbol fully in until it clicks into place.

Please note:
If the infuser is difficult to insert, before insertion, squeeze the
two levers shown in the figure to make it smaller

7. Once inserted, make sure the two coloured buttons have poppedout again

8. Close the infuser door

9. Put back the water tank