Skip to Content
De'Longhi Coffee Machines Help Center
MaestosaMessage: INSERT INFUSER ASSEMBLY

Maestosa

Message: INSERT INFUSER ASSEMBLY

Try this solution

Make sure the infuser is properly inserted

Possible cause:
The infuser has not been properly replaced
after cleaning.

Follow the insertion part of this step-by-step guide:

1

Important

The infuser may not be extracted when the machine is on.

2

Turn off the coffee machine

3

Press the button, open the door and extract the water tank

4

Open the infuser door positioned on the right side of the coffee machine

5

Press the 2 coloured release buttons inwards and at the same time pull the infuser outwards

6

Soak the infuser in water for about 5 minutes, then rinse under the tap

Then clean the infuser without using washing up liquid as it could be damaged.

Important
RINSE WITH WATER ONLY
NO WASHING UP LIQUID - NO DISHWASHER

7

Use the brush to remove any coffee residues left in the infuser housing, visible through the infuser door

8

After cleaning, put the infuser back in the appliance, inserting it in the support

9

Once inserted, make sure the two red buttons have popped out again

10

Close the infuser door

11

Put the water tank back and close the front door

Need more help?

Ask a different questionMaestosa
Select a different product
On this page
© 2024|Sitemap